Product Catalog
Industrial Cleaners and Lubricants
The most common mistake: using penetrating oil as a lubricant.
Maintenance chemical groups
| Group | Real job | Common mistake |
|---|---|---|
| Penetrating oil | Loosen seized connections | Used as a lubricant instead |
| Contact cleaner | Clean electrical contacts | Plastic compatibility not checked |
| Industrial cleaner | Dissolve oil and dirt | Painted surface compatibility skipped |
| Chain oil | Penetrate chain links | Confused with general-purpose spray |
Frequently asked questions
Are penetrating oil and lubricant the same thing?
No. Penetrating oil is thin, gets into tight spaces and eases loosening — but doesn't provide lasting lubrication. Lubricant leaves a persistent film. A mechanism lubricated with penetrating oil dries out fast.
What cleaner should I use in an electrical panel?
Contact cleaner — fast-evaporating, no residue. Check plastic and wire insulation compatibility first though, as some products soften plastics.
What matters when choosing grease?
Operating temperature, load, RPM and environment (water, dust, chemical), plus NLGI consistency grade. Food areas require food-grade grease.
Is it a problem to mix different greases?
Yes — incompatible greases can break down structurally, going soft and runny, or hardening and losing lubrication. Clean out old grease before switching.